Techne Tecal Dri-Block® temperature baths
Anville series 300 manufactured by Techne
For thermocouple sensor calibration of the complete EaziVal system the temperature of the thermocouples must be maintained in a stable state. EaziVal provides multi-point calibration at 'high', 'low' and 'check-point' temperatures with the scale and offset values automatically calculated for each sensor. The Anville 300 bath has an operating range from 40°C to 325°C. The large sensor capacity of three 3mm, three 6mm and one 10mm diameter holes make the unit particularly suitable for thermocouple calibration.
Anville series 300 bath
- Part number Anville 300
- Temperature range 40°C to 325°C
- Stability ±0.03°C
- Block uniformity ±0.2°C
- Accuracy ±0.3°C
- Display resolution ±0.1°C
- Set point resolution ±0.1°C
- Measuring zone 0 to 50mm from base of well
- Time to stability 10 minutes (after set temperature is reached
- Heating time 9 minutes (from 40°C to 300°C)
- Cooling time 18 minutes (from 300°C to 100°C)
- Immersion tube 110mm deep
- Fixed insert large sensor capacity of three 3mm, three 6mm and one 10mm diameter holes
- Dimensions 203.2 x 203.2 x 222.25 mm deep
- Power supply 230VAC/110VAC switchable
- Weight 4.0kg
- Operating ambient 10°C to 40°C
- Supplied with two year warranty, fits sterilizer validation kit case or soft case available
Techne Tecal 425H
For thermocouple, PT100 and liquid filled sensor calibration the Tecal 425H provides stable set points with fast heating and cooling. The Tecal 425H controls allow the user to set a number of calibration programmes with the temperature, ramp rate and dwell time stored in the unit.
The Techne Tecal 425H Dri-Block® bath covers a temperature operating range from 40°C to 425°C, has a range of removable inserts. The unit is supplied with a standard insert with two 6mm and two 12mm diameter holes and a soft carrying case.
Techne Tecal 425H Dri-Block® bath
- Part number Tecal 425FA
- Temperature range 40°C to 425°C
- Stability ±0.05°C
- Block uniformity ±0.2°C
- Accuracy ±0.3°C
- Measuring zone 0 to 50mm from base of well
- Time to stability 10 minutes (after set temperature is reached)
- Heating time 15 minutes (from 40°C to 400°C)
- Cooling time 25 minutes (from 400°C to 100°C
- Immersion tube 114mm deep x 38mm diameter
- Standard insert 2x6mm, 2x12mm diameter holes
- Power supply 230VAC
- Weight 9kg
- Operating ambient 10°C to 40°C
- Supplied with two year warranty and soft carry case
Techne Tecal 140F and 425F
The Techne 140F and 425F dry-block baths provide stability with fast heating and cooling enabling rapid setting of the three temperature set points.
The Tecal 140F dry-block bath covers a temperature operating range from -20°C to 140°C and has a range of removable inserts. The Tecal 425F dry-block bath covers a temperature operating range from -40°C to 425°C and has a range of removable inserts. The units are supplied with a standard insert with five 6mm diameter holes and a soft carry case.
Techne Tecal 140F Dri-Block® bath
- Part number Tecal 140F
- Temperature range -20°C to 140°C
- Stability ±0.05°C
- Block uniformity ±0.2°C
- Accuracy ±0.3°C
- Display resolution ±0.01°C
- Set point resolution ±0.1°C
- Measuring zone 0 to 50mm from base of well
- Time to stability 10 minutes (after set temperature is reached)
- Heating time 5 minutes (from 20°C to 100°C)
- Cooling time 9 minutes (from 100°C to 0°C)
- Immersion tube 114mm deep x 38mm diameter
- Standard insert 5x6mm diameter holes
- Dimensions 207mm wide x 273mm high x 289mm deep
- Power supply 230VAC
- Weight 11kg
- Operating ambient 10°C to 40°C
- Supplied with two year warranty and soft carry case
Techne Tecal 425F Dri-Block® bath
- Part number Tecal 425FA
- Temperature range 40°C to 425°C
- Stability ±0.03°C
- Block uniformity ±0.2°C
- Accuracy ±0.3°C
- Display resolution ±0.01°C
- Set point resolution ±0.1°C
- Measuring zone 0 to 50mm from base of well
- Time to stability 10 minutes (after set temperature is reached)
- Heating time 12 minutes (from 40°C to 400°C)
- Cooling time 21 minutes (from 400°C to 100°C)
- Immersion tube 114mm deep x 38mm diameter
- Standard insert 5x6mm diameter holes
- Dimensions 170mm wide x 270mm high x 255mm deep
- Power supply 230VAC
- Weight 6.3kg
- Operating ambient 10°C to 40°C
- Supplied with two year warranty and soft carry case
The contents of this site are © Anville Instruments Ltd 2010 and may not be reproduced without written permission. "EaziVal" is a trademark of Anville Instruments Ltd. All other brand and product names are trademarks or registered trademarks of their respective owners.
