Series 300 dry block temperature calibrator
The Anville Series 300 dry block calibrator provides thermal stability with
fast heating for multipoint calibration. The digital display of calibrator
temperature is to 0.1°C [over the bath operating range]
and the large sensor capacity of three 3mm, three 6mm and one 10mm
diameter holes make the unit particularly suitable for thermocouple
calibration.
Supplied with a two year warranty.
Specification
Figures quoted are at the base of the well at the time of calibration.
Temperature range: 5°C/9°F above ambient to 325°C/617°F
Over-temperature limit: 450°C/842°F (approximately)
Display resolution: 0.1°
|
30 to 200 degrees C |
200 to 300 degrees C |
Accuracy |
±0.3°C |
±0.3°C |
Stability (after 15 minutes) |
±0.03°C |
±0.05°C |
Well to well uniformity |
0.015°C |
0.025°C |
|
|
|
Heat up time 20° C to 300°C: 9 minutes
Cool down 300°C to 100°C: 18 minutes
Immersion Depth: 4.5" (114.3mm)
Fan Cooling: Automatic
Weight: 9 lbs (4 Kg)
Dimensions* (H x W x D): 8.75 x 8 x 8 inches/222.25 x 203.2 x 203.2 mm
*excluding the carrying strap
Electrical supply
Voltage Cycles Power
230V 50/60Hz 900W
110V 50/60Hz 900W
The contents of this site are © Anville Instruments Ltd 2010 and may not be reproduced without written permission. "EaziVal" is a trademark of Anville Instruments Ltd. All other brand and product names are trademarks or registered trademarks of their respective owners.
